Skip to content

NitroTek

F14 TWIN 70MM JOLLY ROGER TOP GUN EDF RC JET PNP VERSION

  • Wingspan
  • 1100mm
  • Length
  • 1086mm
  • Flying Weight
  • 1100-1300g
  • Twin motor
  • Powerful 2430 outer runner brushless motor
  • Twin ESC
  • 45A ESC 5A UBEC

      ,
    • Twin 70mm ducted fan
    • ,
    • With variable sweep wing, retract system
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • 90% assembled
    • ,
    • Some Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Working swing wings
    • ,
    • Retractable landing gear
    • ,
    • Stunning paintwork
    • ,
    • Twin 70mm electric ducted fans
    • ,
    • State of the art components
    • ,
    • Can perform amazing aerobatics
    • ,
    ,

    The F-14 Tomcat is a supersonic, twin-engine, two-seat, variable-sweep winged ...

    NitroTek

    F-5 64MM TIGER EDF RC JET PNP VERSION

  • Wingspan
  • 532mm
  • Length
  • 939mm
  • Flying Weight
  • 500g
  • Wing area
  • 7dm2 
  • Wing Load
  • 70g/dm2
  • Servos
  • 5 x 9g servos
  • Fan
  • 64MM Ducted
  • Motor
  • Powerful 14L in-runner brushless
  • ESC
  • 25A ESC

      ,
    , ,
      ,
    • 64 mm EDF
    • ,
    • Full aerobatic characteristics
    • ,
    • Brushless setup
    • ,
    • Ready to fly in just minutes
    • ,
    • Super tough, lightweight airframe
    • ,
    • Perfect appearance and emulation
    • ,
    • Take off from ground or hand launched
    • ,
    • Excellent flight performance
    • ,
    • Stable inverted flight
    • ,
    • Made by Starmax - industry leaders in quality
    • ,
    • Slow speed flying capable
    • ,
    ,

    The F-5E aircraft was designed for use by allies primarily ...

    NitroTek

    F16 64MM RC JET VECTORED PNP VERSION IN BLACK AND GREY

  • Wingspan
  • 800mm
  • Length
  • 1020mm
  • Wing Load
  • 35 g/dm²
  • Fly Weight
  • 1100g

      ,
    • 7 pcs 9g servos
    • ,
    • Brushless motor 2632 out runner KV4100
    • ,
    • 45A ESC 5A UBEC
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • Thrust vectoring
    • ,
    • 90% assembled
    • ,
    • Some Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Stunning paintwork
    • ,
    • 64 mm electric ducted fan
    • ,
    • State of the art components
    • ,
    • Can perform amazing aerobatics
    • ,
    ,

    This fighter is one of the classics, the F-16 is ...

    NitroTek

    CESSNA 182 RED RC PLANE PNP VERSION

  • Length
  • 1030mm
  • Flight weight
  • 930g
  • Wingspan
  • 1410mm
  • Wing load
  • 34g/dm2

      ,
    • 4pcs 9G servos
    • ,
    • Out-runner Brushless motor, KV900
    • ,
    • 30A ESC
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • 90% assembled
    • ,
    • Some Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Stunning paintwork
    • , ,
    • State of the art components
    • ,
    • Can perform amazing aerobatics
    • ,
    ,

    This is a large scale model of the Cessna 182 ...

    NitroTek

    TAIGEN ADVANCED METAL RC TANK - TIGER CAMO

    0px; padding
  • 0px; padding
  • 0px; padding
  • 0px; padding
  • 0px; padding

    ,

    , ,
      ,
    • Special paint job
    • ,
    • Metal caterpillars
    • ,
    • Metal drive wheel and idle wheel
    • ,
    • Metal gearbox
    • ,
    • Shock absorbers
    • ,
    • Metal network
    • ,
    • Painted commander
    • ,
    • Strengthened metal chassis
    • ,
    • Metal view hole
    • ,
    • Metal armour
    • ,
    • Metal turret cover
    • ,
    • Metal shoulder wheel
    • ,
    • Metal front and rear hook
    • ,
    • Metal machine gun light
    • ,
    • Metal front forward light
    • ,
    • Upgraded Ni-MH 2000Mah battery
    • ,
    • Smoke effects simulator
    • ,
    • Sound effects simulator
    • ,
    ,

    The Taigen BB tanks are of the highest quality and ...

    NitroTek

    BARBARIAN EXL 1/8 SCALE BRUSHLESS RC MONSTER TRUCK 2.4G

  • Height
  • 230mm
  • Length
  • 570mm
  • Width
  • 450mm
  • Wheel base
  • 370mm
  • Track F/R
  • 355mm
  • Ground clearance
  • 50mm
  • Weight
  • 4600g

      ,
    , ,
      ,
    • 4WD, Brushless Power System;
    • ,
    • Newly designed C-hub steering system. King pin axis extends to the wheel centre, improving steering performance;
    • ,
    • Newly developed suspension system, twin adjustable rear suspension modes for flexible driving;
    • ,
    • Solid aluminum chassis, centralised chassis design to get quicker steering and fast response;
    • ,
    • Motor mount, not only keeps the motor cool, but also protects the motor when jumping and bashing
    • ,
    • Adjustable battery holder mounts, can fit almost all stick Li-Pos available in the market;
    • ,
    • Optional mechanical braking system, provides accurate deceleration and jumping control;
    • ,
    • 16mm super big bore oil aluminum shocks;
    • ,
    • All steel gear, machined motor gear, machined diff. gear;
    • ,
    • 17mm hex alum. wheel hub;
    • ,
    • Realistic All-terrain tyres with foam inserts;
    • ,
    • Ultra-strong front and rear bumpers;
    • ,
    • Performance-designed chrome wheel.
    • ,
    • Front CVD, has all ball bearing construction
    • ,
    ,

    The Barbarian EXL is a fully built, top of the ...

    NitroTek

    SELF BUILD RAPTOR RC TRUGGY - BRUSHLESS VERSION

  • Width
  • 330MM
  • Height
  • 140MM
  • Length
  • 410MM
  • Wheelbase
  • 270MM
  • Gear ratio
  • 8.95
  • Wheel dia.
  • 110*55MM
  • Ground clearance
  • 36MM
  • Radio
  • FM 27mhz Pistol Type
  • Battery
  • 11.1V 1800mah Li-Polymer
  • Motor
  • Brushless 2399kv
  • ESC
  • 25A Brushless

      ,
    • Scale: 1:10
    • ,
    , ,
      ,
    • 1/10 Scale brushless powered build it yourself car
    • ,
    • Everything needed to build included, even the tools
    • ,
    • 4WD Shaft drive system
    • ,
    • Extreme power brushless motor
    • ,
    • Oil-filled shocks
    • ,
    • Powerful Li-Polymer battery with balanced charger
    • ,
    • Front and rear bevel differentials
    • ,
    • Brushless ESC
    • ,
    • Pre-painted exclusive body shell
    • ,
    • High quality FM 27MHZ CE approved Radio system with changeable crystals
    • ,
    ,

    Our new full 1:10 scale Raptor brushless rc truggy self ...

    NitroTek

    SELF BUILD RAPTOR RC TRUGGY - BRUSHED VERSION

  • Width
  • 330MM
  • Height
  • 140MM
  • Length
  • 410MM
  • Wheelbase
  • 270MM
  • Gear ratio
  • 8.95
  • Wheel dia.
  • 110*55MM
  • Ground clearance
  • 36MM
  • Radio
  • AM 27mhz Pistol Type
  • Battery
  • 7.2V Ni-Mh Tamiya type
  • Motor
  • 540 Brushed
  • ESC
  • Proportional forward, brake, proportional reverse.
  • Scale
  • 1

      ,
    , ,
      ,
    • 1/10 Scale build it yourself car
    • ,
    • Everything needed to build included, even the tools.
    • ,
    • 4WD Shaft drive system
    • ,
    • High power 540 motor
    • ,
    • Oil-filled shocks
    • ,
    • 7.2V Tamiya type battery pack with charger
    • ,
    • Front and rear bevel differentials
    • ,
    • Electronic speed controller
    • ,
    • Pre-painted exclusive body shell
    • ,
    • CE approved Radio system with changeable crystals for using more than one model at a time without interference
    • ,
    ,

    The Raptor truggy is a high performance, high speed speed ...

    NitroTek

    GS RACING STORM EVO 25 1/8TH RC NITRO BUGGY

  • Length
  • 490mm
  • Height
  • 182mm
  • Ground clearance
  • 22mm
  • Wheelbase
  • 320-325mm
  • Tyres
  • 116mm x 42mm
  • Weight
  • 3350g
  • Radio
  • 2.4G
  • Fuel tank
  • 125cc

      ,
    • Track: F:256mm (adjustable), R:251mm
    • ,
    , ,
      ,
    • 100% factory assembled 1/8th scale race buggy
    • ,
    • Over 75% compatible with Storm series buggies
    • ,
    • Full range of options/upgrades available
    • ,
    • Fully fitted with precision ball bearings
    • ,
    • Tuned .25 exhaust system
    • ,
    • Powerful Team Infinity .25 Engine
    • ,
    • Pre-glued GS Road Spider tyres on GS dish wheels
    • ,
    • Front universal drive shafts
    • ,
    • Pre-painted and trimmed Kom Designs body with decals
    • ,
    • Low centre of gravity
    • ,
    • Dust guard front C-hub
    • ,
    • 125cc fuel tank with filter and adjustable pressure fitting
    • ,
    • Adjustable front/rear toe in and camber
    • ,
    • Front, centre and rear differentials
    • ,
    • 3 shoe clutch system
    • ,
    • Adjustable wheelbase
    • ,
    • Heavy duty suspension arms
    • ,
    • 4WD shaft driven transmission
    • ,
    • 46 tooth spur gear
    • ,
    ,

    The international race winning GS Racing is back in the ...

    NitroTek

    AIRWOLF 4CH RC HELICOPTER WITH LIPO BATTERY

  • Battery
  • 7.4V Li-po 600mah
  • Control range
  • around 60m
  • Flight duration
  • 8-10 minutes

      ,
    • Product Size 42*34*18.50(cm)
    • ,
    , , ,
      ,
    • 4 Ch Remote Control
    • ,
    • Counter Rotating Blades
    • ,
    • Plastic Realistic Body
    • ,
    • Flashing LED Lights
    • ,
    • Detailed Paint Job
    • ,
    • Uses ultra tough iron-fiber materials
    • ,
    • New servo and mixer system
    • ,
    • Powerful lithium battery
    • ,
    • Micro servos, receiver, Gyro and Speed controller/mixer
    • ,
    ,

    If you're looking for a helicopter with more control and ...

    NitroTek

    APACHE AH-64 FERAL-BEAST 4CH RC HELICOPTER WITH 2.4GHZ REMOTE CONTROL

  • Length
  • 400mm, Height
  • Main Rotor
  • 520/570mm Motor
  • Material of Rotor
  • Nylon plus firberglass
  • Function
  • Up & down, left & right, forward & back and rotate
  • Battery type
  • Lipo Battery
  • Charging time
  • 1 hour
  • Flying time per charge
  • 10-12 minutes
  • Control distance
  • 100m+

      ,
    • 4 channel radio control duel rotor system
    • ,
    • 2 Servos
    • ,
    • PG03 gyro
    • ,
    • ON / OFF Switch
    • ,
    , ,
      ,
    • 2.4Ghz Four Channels Radio Equipment
    • ,
    ,

    The 4 channel RC Apache Feralbeast AH-64 Helicopter is stable ...

    NitroTek

    ATTACKER 1/8 SCALE NITRO RC BUGGY

  • Height
  • 185mm
  • Length
  • 505mm
  • Width
  • 310mm
  • Wheel base
  • 315~320mm
  • Track F/R
  • 310mm
  • Ground clearance
  • 30mm
  • Weight
  • 3300g
  • Transmitter
  • 2 channel

      ,
    , ,
      ,
    • 1/8 Scale Gas Powered Car
    • ,
    • Fully Assembled
    • ,
    • 4wd Shaft Drive System
    • ,
    • W/.18 Easy-To-Start Pull Start Powerful Engine
    • ,
    • Oil-Filled Aluminium Shocks
    • ,
    • Single Speed
    • ,
    • Front And Rear Bevel Differentials
    • ,
    • W/125cc Fuel Tank
    • ,
    • Quicker Steering And Fast Response
    • ,
    • Low Centre Of Gravity Design
    • ,
    ,

    The Attacker is our entry level to the world of ...

    NitroTek

    EXTRA 330 4CH BRUSHLESS AEROBATIC RC PLANE 2.4GHZ

  • Wing Span
  • 37in/940mm 
  • Length
  • 29.7in/755mm 
  • Weight
  • 18oz/510g 
  • Wing Area
  • 14.6dm²
  • Motor
  • Brushless (1050kv)
  • Servos
  • 4 x 9g High Speed
  • ESC
  • 25A Brushless
  • Battery
  • 11.1V 1250mAh Li-Polymer
  • Transmitter
  • 4CH 2.4Ghz
  • Receiver
  • 5CH Micro
  • Range
  • 1000m

      ,
    • Field charger with crocodile clips, suitable for car/leisure battery
    • ,
    , ,
      ,
    • 4 Channel 2.4G radio
    • ,
    • Acrobatic 3D flying
    • ,
    • Speed 400 Brushless Motor
    • ,
    • 4 Servos
    • ,
    • Almost ready to fly. Minor assembly required.
    • ,
    • Everything included apart from 8 x AA batteries for the transmitter
    • ,
    • Great Aerobatic Capabilities
    • ,
    • Powerful li-po battery with charger
    • ,
    • Long 20 minutes flight time
    • ,
    ,

    Fly in 3D and perform aerobatic manoeuvres with the new ...

    NitroTek

    JAGUAR 3CH MILITARY J3 PIPER CUB RC PLANE

  • Wing span
  • 955mm
  • Length
  • 730mm
  • Weight
  • 640g 
  • Battery
  • 8.4v-650mAh NI-MH
  • Power
  • 380 brushed motor
  • Flying weight
  • 450g
  • Flying time
  • approx. 15 mins
  • Flying height
  • approx. 300m
  • Range
  • 500m

      ,
    • 4 channel TX
    • ,
    • 6 channel RX
    • ,
    • 2*9g servo,
    • ,
    • 1*25A brush ESC 
    • ,
    , ,
      ,
    • Millitary USAF Livery
    • ,
    • Can take off from the ground or hand
    • ,
    ,

    This Jaguar is a Piper Cub based remote control plane, ...

    NitroTek

    A-4 BLUE ANGELS SKYHAWK 4CH EDF 55MM RC JET

  • Wingspan
  • 468mm
  • Length
  • 680mm
  • Flying Weight
  • 450g
  • Wing area
  • 7dm²
  • Wing Load
  • 65g/dm²
  • Radio System
  • 4Ch Tx and 6 Ch Rx
  • Battery
  • 3 Cell Li-Po,1300 mAh,11.1V
  • Range
  • 1000m

      ,
    • Four 9 gram servos
    • ,
    • 55mm Ducted fan
    • ,
    • Brushless motor
    • ,
    • 30A ESC
    • ,
    , ,
      ,
    • Pre-painted foam fuselage & wings
    • ,
    • 90% assembled
    • ,
    • Pre-installed electrics
    • ,
    • CAD engineering quality
    • ,
    • Stunning paintwork
    • ,
    • 55 mm electric ducted fan
    • ,
    • State of the art components
    • ,
    • 2.4G Transmitter 
    • ,
    • Can perform amazing aerobatics
    • ,
    • Powerful batteries
    • ,
    • Approx 15min flight time
    • ,
    ,

    The A-4 Skyhawk is a delta winged, carrier-capable, ground-attack aircraft ...

    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby